Printing Guide¶
Primary Color¶
Example: mammoth Voron Z Idler Main Body Left.stl
These files have no prefix in their filename so are safe to print in your primary color.
Accent Color¶
Example: [A] mammoth-3D Voron2.4 Z Idler_V1.3 A x2.stl
These files are prefixed with [A] and are intended to be printed in your accent color.
Quantity Required¶
Example: mammoth-3D Voron2.4 Z Idler_V1.3 Tensioner x2.stl
If any file ends with x#, that is telling you the quantity of that part required to build the Z-Axis Belt Tensioner.
Support and Drilling Out Holes¶
No need for that
Layer Height and Line Width
Some parts have supporting layers to allow unsupported features to be printed successfully. These supports are designed to work at a layer height of 0.2mm, so they may not be sliced correctly if your layer height is not 0.2mm.
How to print¶
Parts to print¶
| Qty | Name | Layer hight | Wall loops/Min. Wall Thickness | Top/Bottom shell layers | Infill | Material | Accent Color |
|---|---|---|---|---|---|---|---|
| 2x | Belt Tensioner Mainbody Right | 0.2mm | 4/1.6mm | 5 | 42% | ABS/ASA/PA-CF | No |
| 2x | Belt Tensioner Coverbody Right | 0.2mm | 4/1.6mm | 5 | 42% | ABS/ASA/PA-CF | No |
| 2x | Belt Tensioner Mainbody Left | 0.2mm | 4/1.6mm | 5 | 42% | ABS/ASA/PA-CF | No |
| 2x | Belt Tensioner Coverbody Left | 0.2mm | 4/1.6mm | 5 | 42% | ABS/ASA/PA-CF | No |
| 4x | U Body | 0.2mm | 6/2mm | 5 | 60% | ABS/ASA | Yes |
| 4x | Tension Knob | 0.2mm | 4/1.6mm | 5 | 42% | ABS/ASA | Yes |
Tip
The "Tensioner" can be printed only once and you don't need to keep it on the printer. You will only need them to tension your belts. But can be removed afterwards.