| 2x |
2.5mm CNC Kitchen Threaded Insert |
Threaded Insert |
| 2x |
M2.5x8 SHCS |
Reuse the two installed on the CNC |
| 1x |
OMRON SS-5GL |
Reuse the one installed on the CNC |
| 19x |
M3 Threaded Insert (M3x5mmx4mm) |
Threaded Insert |
| 14x |
M3x6 Flat Head Ultra Low Profile |
Ultra Low |
| 4x |
M3x8 SHCS |
|
| 4x |
M3x20 SHCS |
|
| 4x |
M3 Washer |
|
| 6x |
M5x12 BHCS |
Reuse the four installed on the CNC |
| 2x |
M5 Drop-in T-nut |
|
| 4x |
Dowel Pin M3x50mm |
Dowel Pin |
| 12x |
Sliding bearings (M3borex5x5mm) |
Sliding bearing |
| 2x |
Adjusting Ring 8mm Bore |
Reuse the two installed on the CNC |
| 2x |
F608 Bearing |
Reuse the two installed on the CNC |
| 4x |
608-ZZ Bearing |
Reuse the four installed on the CNC |
| 8x |
Round Micro Magnets (6x3mm-N52) |
Magnet |